MAC TOOLS MW250 Provozní pokyny stáhnout pdf (Strana 232)

100

101

TM 5-4310-452-14

4-87. OIL SEPARATOR FILTER ELEMENT REPLACEMENT (Con't).

b. INSTALLATION

1. Install new oil separator filter element (6) in oil separator (5).

2. Install access cover (4) and 8 screws (3) on oil separator (5). Tighten screws to 50 lb. -ft. (67.8 N•m) (see

Appendix F for tightening sequence).

3. Connect discharge air tube (8) to elbow (7).

4. Tighten manifold end of discharge air tube (8).

5. Connect oil line (1) to check valve (2).

6. Check oil separator oil level. Add oil only if oil level is not visible in sight glass when engine is not running (see

LO 5-4310-452-12).

FOLLOW-ON TASKS:

• Start engine and check for leaks (see paragraph 2-12).

• Close access door assembly.

4-175

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 404 405

Komentáře k této Příručce

Žádné komentáře

MAC TOOLS MW250 Provozní pokyny Strana 232

Komentáře k této Příručce

Související produkty a manuály pro Svařovací systém MAC TOOLS MW250