MAC TOOLS MW250 Provozní pokyny stáhnout pdf (Strana 194)

100

101

TM 5-4310-452-14

4-68. AIR CHAMBER REPLACEMENT.

This Task Covers:

a. Removal b. Installation

Initial Setup:

Equipment Conditions: Materials/Parts:

• Engine off. • Two lockwashers

• Trailer parked on flat, level surface.

• Parking brake set. Tools/Test Equipment:

• General mechanic's tool kit

a. REMOVAL

1. Disconnect hose assembly (1) from elbow (2).

Remove elbow from air chamber (3).

2. Remove 2 nuts (5), lockwashers (6), and air

chamber (3) from bracket (4). Discard lockwashers.

3. Remove shims (7) from air chamber (3).

b. INSTALLATION

NOTE

When installing air chamber, ensure

that thickness of shims is equal to

0.58 ± 0.03 in. (14.2 ± 0.7 mm).

1. Install shims (7) on air chamber (3).

2. Position air chamber (3) on bracket (4) and install 2

nuts (5) and new lockwashers (6).

3. Install elbow (2) in air chamber (3).

4. Connect hose assembly (1) to elbow (2).

4-133

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 404 405

Komentáře k této Příručce

Žádné komentáře

MAC TOOLS MW250 Provozní pokyny Strana 194

Komentáře k této Příručce

Související produkty a manuály pro Svařovací systém MAC TOOLS MW250